Common Plumbing Mistakes To Avoid

Common Plumbing Mistakes To Avoid

Plumbing is one of the important procedures that need to be carried out during construction. It is a task that requires a lot of skill and concentration. It is one of those jobs where the professionals cannot afford to do even a small mistake.

Whether it is a house or any building for that matter leaking pipes or stagnating water is the last thing that anyone wants to have. In this article, we will see the common plumbing mistakes that need to be avoided.

Common Plumbing Mistakes To Avoid

Vents and Traps

One of the common things that are being overlooked is having a proper vent in the basement. At times it is easy to combine vents, but before doing it make sure that the state building code allows it. Also, understand that every trap requires a vent.

If there is no vent for a trap, then there are good possibilities that the water can be siphoned which leaves the trap useless and dry. If you are using a trap for the sink opt for the P-trap which is the perfect choice for the sink.

Inadequate slope

We all know that too much of slope is never good. If the slope is too much, we have to keep hitting the floor on a daily basis. At the same time if enough slopes are not provided, then the water flow to the drain will not be perfect.

Some amount of water will be stagnated, and we might have to push the water manually for it to reach the drain. Hence it is mandatory to provide enough slopes so that the water and some solids dissolved in it reach the drain without any hindrance.

Inadequate Clean Outs

When it comes to cleanouts, there are a lot of things that might go wrong. The two common mistakes are the inadequate number of cleanouts and the wrong location of the cleanouts. As per building code cleanouts are not necessary above the first floor.

But depending on the design of the lines it would be better if you can add some cleanouts. At the base of the sanitary stack, a cleanout is mandatory. If the change of direction in the line is exceeding forty-five degrees, then a cleanout is a must.

Space around toilets

Just because you need the hall and the room spaces to be more, it does not mean that you can reduce the space of the toilet. There should be a minimum space of fifteen inches in the side and eighteen inches in the front.

This is because if there is any major issue in the toilet that needs to be treated, space around will make the work easier for the individual.

  Pressure relief valves

As the name states, the pressure relief valves are required to relieve the pressure that is built up in the pipes. These drain piles are closed structures with a constant flow of liquid.

There are good possibilities that pressure might build up in certain areas which are not good for the draining process. Hence enough pressure relief valves must be fitted for the flawless working.

Continue Reading

6 Steps to Fix a Toilet Leaking at the Base (+ Prevention Tips)

6 Steps to Fix a Toilet Leaking at the Base (+ Prevention Tips)


Rest room leaks are not nearly anything to stress more than, but no 1 likes walking into the rest room with dry socks and coming out with soaked socks. Toilets that leak at the base are commonly an quick correct with some Diy how-to ways. 

You can make the repairs you have to have promptly working with this guide that provides you with the explanations behind your bathroom leak, the equipment you are going to have to have, what to do about the leak, and guidelines to avert foreseeable future rest room leaks.

Continue Reading

7 Signs You Need to Call A Sacramento Plumbing Contractor

7 Signs You Need to Call A Sacramento Plumbing Contractor


There are several scenarios wherever you would not need to have to get in touch with a plumbing contractor. For occasion, plumbing difficulties like clogged bogs or drains are frequently quick to correct with a plunger or a drain unclogging agent. 

But, what takes place if you confront a main plumbing problem that you are not able to resolve your self? Do you have a program of motion in put? Do you know who to call?

Continue Reading

3 Ways to Fix a Leaking Ceiling (+ Tips for Preventing Severe Damage)

3 Ways to Fix a Leaking Ceiling (+ Tips for Preventing Severe Damage)


Ceiling leaks are a plumbing difficulty that can be detected by blistered or peeling paint, dripping h2o, and discoloration on your ceiling. 

A ceiling leak is a indicator that there is another dilemma with your dwelling plumbing system or roof.

If you notice your ceiling has these challenges, you can have to have to observe down the source of the challenge just before you can commence to resolve the dilemma by yourself or simply call a plumber to fix it for you.

Continue Reading

How to Choose the Best Type

How to Choose the Best Type


Shower heads are one of these appliances that persons are likely to forget and solution as an afterthought.

But when it will come time to entire a household advancement task in your lavatory, the shower generally will come up as a good location to commence the up grade. Immediately after all, with so lots of shower head sorts to pick out from, the procedure of discovering the finest kind to healthy your tastes can be difficult.

That is why it really is important to just take the time to make the right final decision. 

Why Picking out the Appropriate Shower Head Issues

People typical spigots you observed decades in the past feel like a relic of the past when you look at all the diverse possibilities out there right now. But before you begin searching, you want to fully grasp the effects shower head varieties may well have on your life-style and your wallet. 

1st of all, you want to make positive you get the shower experience you want. For case in point, you may possibly like a handheld head because you want a practical possibility for washing your young children, bathing your dogs, and cleansing the tub.

Or probably you want a head that saves you huge on your drinking water monthly bill. For those people who like the finer things in existence, massage and other spray patterns are offered with particular styles of shower heads. 

Another aspect most individuals have a tendency to neglect is how your shower head affects your wellbeing. An unfortunate truth often dismissed is the reality that shower heads are a excellent ecosystem for pathogenic germs and unsafe microbes.

Of class, threat of infection is tiny to nonexistent, but regular exposure to contaminated h2o cascading on to your facial area and human body is anything you can simply stay away from. Make guaranteed you system for how you will clear your shower head. 

On top of that, you also want to consider the price. Feel beyond the selling price tag of the shower head by itself — glance at the affect it will have on your water monthly bill. Some out-of-date shower heads drain your wallet (pun supposed) by employing up to 10 gallons of h2o for each minute when it’s fully opened. Thankfully, newer shower heads can help you save you significant by applying about two or a few gallons for each moment, thanks to their style. 

Eventually, the total price of possession of your shower head comes down to the levels of drinking water force it uses. 

Small Pressure Shower Heads vs. Significant Stress Shower Heads: The Pros and Cons 

This subject matter is probable your principal concern when you’re browsing for the very best shower head for your house. In the end, your determination will come down to what you want to prioritize — the total shower encounter or your h2o invoice.

Pros and Cons of Reduced Stress Shower Heads

A 2016 research found that showers are the 2nd largest supply of indoor water use, accounting for about 19 percent of total use per capita per working day. It’s no speculate that individuals switch to reduced stream shower heads to slice back again on their drinking water payments. 

The big edge of using decrease force shower heads is noticeable: Since the head permits smaller sized amounts of drinking water to stream via it as in contrast to other heads, the restricted flow eventually minimizes your drinking water use. 

The execs are pretty apparent. Small force shower heads enable with the next:

  • Handling water squander and slicing again on your total h2o bill. 
  • Decreasing your electrical invoice by utilizing considerably less electric power to heat much less h2o currently being made use of. 
  • Lowering the volume of emissions by preserving on electrical power use. 

There are some downsides as effectively. These include the next:

  • You will encounter a time lag, which means when you modify the temperature, it can take more time for that modify to appear through the head. 
  • Your drinking water will be cooler simply because lower stream heads incorporate drinking water droplets flowing out with the air, generating the drinking water great promptly, as compared to regular shower heads. 

Basically set, a lower force shower head can reduce costs and offer an environmental gain, but the knowledge can be aggravating, especially if you choose regular, solid drinking water flows following dealing with inadequate drinking water pressure in the previous. 

Professionals and Disadvantages of Significant Tension Shower Heads

These varieties of shower heads are practical for growing h2o force if you come across your present-day head ineffective. Numerous folks desire a shower encounter that delivers significant amounts of water pressure, in particular if they opt for substantial end heads that consist of a therapeutic massage setting. 

The benefits of using large pressure shower heads are as follows:

  • You get a improved working experience if you favor a solid water circulation. 
  • You are equipped to boost temperature control, lessening the lag among turning the knob and basically experience the h2o get hotter or colder.
  • You generally get additional options for spray styles, like a gentle mist, highly effective stream, or a pulsating massage. 

Nonetheless, the cons of employing these heads typically boil down to expense.

  • You could see an improve in your drinking water bill as you use a lot more water. 
  • In convert, your electrical bill can maximize as well as you use extra energy to warmth your drinking water. 

Now that you know the professionals and drawbacks of utilizing distinctive degrees of drinking water pressure with your shower heads, you’re prepared to take a look at your solutions. 

The Varieties of Very low and Large Stress Shower Heads 

Choosing the proper shower head with the ideal h2o pressure comes down to your own preference. Here are the most typical varieties of shower heads.

Handheld Shower Head

These sorts are attached to the shower elbow by a hose. The head by itself can detach from the holder, so the person can increase it off of the wall. Handheld shower heads are specifically helpful for cleaning your shower enclosure and bathing your youngsters and animals. 

Some of these arrive with a great deal of excess options, like different spray patterns and massage jets. And lots of hand held heads can be mounted to sliding bars, making it easy to regulate it to various heights. 

Dual Shower Head

Simply cannot make a decision involving a hand held selection or a fixed variety? Want the very best of both worlds? The dual shower head is your excellent preference. 

Usually, these techniques supply both of those a hand held head and a set head that is stationary. Dual shower heads involve a diverter valve to proficiently manage drinking water flow. A two way diverter valve will swap stream between the two heads, and a a few way diverter valve will allow you to select which particular person head to use at just one time or to use each heads simultaneously. 

One Spray Shower Head

This type is self-explanatory. It’s a mounted shower head that gives one particular spray environment, frequently referred to as a complete human body spray.

A solitary spray shower head is the greatest possibility for you if you want simplicity. 

LED Shower Head

These share the very same functionality as the relaxation of these shower heads. The only distinction is that they use LED lights to coloration the drinking water, which can be calming and uplight your temper. 

Most LED shower heads occur with a assortment of color options, but some are one colour or offer you a random colour sequence. A further interesting attribute — some styles use water temperature to adjust the shade of the lights. 

Rain Shower Head 

With this possibility, you get large protection, thanks to the extended width of the head by itself. Most rain shower heads are at minimum six inches broad, making you really feel like you are underneath a rain cloud. 

These are mounted on the wall, but some can be mounted in the ceiling of the shower enclosure. The drinking water stream is evenly dispersed, resulting in a lessen tension with a broad coverage. These are finest if you have plenty of h2o force in your dwelling so the head can effectively distribute circulation evenly. 

When you know your preference for water force, acquiring the most effective style of shower head is basic. Maintain in mind that shower head installation is generally basic, but you need to make positive that it’s accomplished properly.

If your new Do it yourself residence jobs have not gone effectively, it may be worthy of employing a professional. This way, you stay clear of common installation mistakes, which can direct to pricey repairs and fixes. 

Dealing With Common Plumbing Problems





Resource connection

Continue Reading

Steps to make the perfect cream cheese

cheese-production

For years, cheese production was an art that was passed down from generation to generation. Cheese production was more a matter of experience and less of know-how.

Today, cheese-making is now considered a science, requiring specialized studies and a set of strict specifications to be practiced from theory to practice. However, there are those who continue to experiment at home, trying to relive those years when cheese-making was a purely domestic affair.

To make our own homemade cheese, you need passion, patience and good reading. Not all cheeses can be made at home. It is good to set easy goals and do not dream of a homemade gruyere because we will be disappointed. However, we can make soft white cheese with a relatively simple process.

The equipment

Most of the tools to start the cheese-making process are already in our kitchen. However before the first attempt, let us make sure that our list is complete.

The no1 tool is a large pot with a thick bottom. The utensil should be stainless but not aluminum as it is likely to be punctured by the acidity of the milk. The thick bottom is needed to spread the temperature evenly so that the milk does not burn. Dosimeters should not be missing from our workbench as everything is the accuracy in measuring the materials.

To the list of essentials we add a laboratory thermometer with indications from 0 to at least 100 ° C, a stirrer to work our mixture and -the most basic- a cheesecloth, the so-called bag, that will hold our homemade curd in the drainage process. To our equipment, we can also add special cheese molds that are commercially available in a variety of materials – stainless steel, wood, plastic – and are perforated to drain the cheese.

The raw materials

And after we got rid of the equipment, it is the turn of the raw materials, most importantly the milk. What kind of milk – cow’s, goat’s, sheep’s, buffalo’s milk – we will use is purely our choice. Depending on the type of milk we will use, the process of making the cheese also changes. The taste of our cheese depends to a large extent on the fat contained in the milk of our choice. The less fat, the milder the taste.

Milk consists of water, protein, fat and trace elements when we add rennet or citric acid to it, depending on our recipe, then it reacts and begins to coagulate. As a result we have the creation of curd and whey, the so-called whey. Casein plays a key role in this process – it is a milk protein – which when the acidity of milk rises, precipitates and with the help of rennet its bonds are broken and the gel is separated from the serum.

The preparation of cheese with sheep’s milk is suitable for beginners, in relation to cow’s or goat’s. This is because this milk has a higher content of casein, coagulates more easily and forms a denser curd. Anyone who tries to make cheese using powdered milk will be disappointed.

Milk for cheese production

Highly pasteurized milk is not suitable for cheese either, while the pasteurized milk that is commercially available may need the addition of calcium chloride to achieve a stable curd. The ideal – for a better taste – is clearly the fresh milk directly from the producer. An important ingredient in cheese-making is the salt which preserves the cheese, helps the whey to drain and of course offers flavor. Its amount ranges from 1% to 4% by weight of the curd.

Every homemade cheese needs its own ingredient to thicken. In feta for example this is rennet – a product of animal origin since it comes from the gastric juice of young calves, sheep and goats – while for other cheeses we can use lemon juice, vinegar or citric acid. These ingredients, in the right amount, will thicken the milk and turn it into cheese.

Homemade cheese is usually made in small quantities and in order to be consumed immediately. If we do not want to eat it the same day, we can put it in a container with a lid and keep it in the refrigerator, but not more than 2 days.

Recipe for homemade white cheese

Ingredients

  • 5 liters of milk
  • 5g Tartaric – Citric Acid
  • A little water (below the middle of a small wine glass)

The yield in cheese depends on the type of milk that will be used, but also on how much we will drain the gel and therefore how much moisture the final product will have.

Directions

Put the milk in a saucepan and start heating on low heat. Stir constantly with gentle movements, using a wooden spoon pass through the bottom of the pot so that no sediment is created. When the milk reaches 85 oC dissolve the sour in the water and pour it into the milk. We continue the mixing and in a short time we will notice that the curd begins to form. Remove from the heat when enough curd has formed on the surface of the pot.

Then, with the slotted spoon, remove the curd little by little from the pot and pour it into the mold. Once all the curd has entered the mold, drain well to remove the excess liquid. Then salt the surface with coarse salt. Leave it in the mold for 3 hours and then turn it upside down and salt again. Leave for another 3 hours and take it out of the mold. It can be consumed as it is soft or we can continue salting 2-3 times and even harden it.

The mold and the bag do exactly the same thing. They collect the curd, shape it and strain the excess liquids. One difference is that the bag is used for the preparation of dry mizithra because with a tight binding it strains the whey better and hangs more easily for the drying of the specific type of cheese.

See more about cheese production:

Continue Reading

5 Irrigation Plumbing Issues Increasing Your Water Bill + How to Save

5 Irrigation Plumbing Issues Increasing Your Water Bill + How to Save


With the correct irrigation plumbing method in put, your lawn need to be finding uniform watering on a normal basis. A appropriately installed procedure is incredibly useful when it comes to trying to keep your garden wholesome. 

The best part of an successful irrigation system is that you really don’t will need to drag your hose close to and drinking water your grass by hand or constantly adjust your sprinkler attachments. Nevertheless, as with any plumbing and irrigation technique, your yard could be costing you a great deal of income by inflating your h2o invoice. 

In addition, a defective technique can diminish the health of your garden and damage its look. This is why you want to be proactive in detecting and addressing popular plumbing problems you can location in your lawn. 

5 Irrigation Plumbing Troubles in Your Property You Have to have to Deal with

A significant bring about for worry when it will come to irrigation complications, apart from your superior h2o bill and weak garden health and fitness, is the impact it can have on the framework of your property by itself. Household plumbing involves regular checking and servicing to avert serious damages to your household. 

For instance, let us say you sprung an irrigation leak in the vicinity of the foundation of your household. This leak, when left unchecked, can induce serious structural destruction to your residence. 

To deal with a climbing drinking water monthly bill and avert extensive-expression injury to your property, seem out for these 5 irrigation plumbing issues:

1. A Leaking Hose 

Your hose is naturally an necessary software you want to hold your lawn hydrated, as well as regulate all kinds of garden maintenance, like clearing particles, cleansing out gutters, and a lot more. Sad to say, as wear and tear builds up in excess of time, your hose is at risk of ripping and tearing. 

This can cause leaks that can disrupt your outdoor chores even though also resulting in sizeable h2o squander. Around time, even small punctures that result in minor leaks can actually compound and increase your h2o invoice significantly. 

The good thing is, correcting a leaking hose is pretty simple. Depending on the severity of the injury, you can embrace the pursuing Do-it-yourself solutions:

  • Fix compact pinholes, which can be induced by sharp objects puncturing the hose, by turning off the water, then making use of electrical tape to the gap. Overlap the tape various occasions around the hose to ensure it is thoroughly sealed for the prolonged term. 

  • When more substantial tears manifest (e.g., your hose is snagged by a bush or the scorching summer days trigger cracking), you can simply turn off the h2o, slice the torn part out with garden shears, then connect the slice ends to a hose mender. The mender has two collars that connect to every single lower stop. At the time you tighten the mender, change off the drinking water to be certain any leak is sealed. 

  • Couplings have a tendency to leak, so when you notice one particular that is bent or damaged, you can just replace it with a new hose coupling. Use a hose cutter to clear away whichever coupling needs to be changed, then insert the uncovered conclude of the hose into the new coupling and twist the collar right up until it is limited. Turn the water on to take a look at it for any leaks. 

Stay proactive with your hoses. There are lots of means to lengthen the existence of your hose, like storing it in your garage to stay clear of exposure to excessive climate or making use of a hose cart to hold your hose flippantly coiled and easy to transport.  

2. The Pool Heater

Heating your pool is a have to in the colder months of the calendar year. Whether you use organic gasoline or propane, you can be expecting your residence energy fees to raise for noticeable motives. 

Only place, the far more your pool temperature drops, the additional strength it will take to raise the temperature to your desired level. This will price you even extra cash on energy if you don’t have a pool deal with to hold the warmth trapped. 

To avoid skyrocketing utility expenditures, make guaranteed you protect your pool at night or when it’s not in use to trap heat. This way, your pool heater is not applying a great deal of energy to consistently increase the temperature of your pool. You can also adjust your desired temperature to a decreased environment to lower the sum of heat your heater needs to create.

3. Irrigation Leaks 

Water hose leaks are uncomplicated more than enough to discover by merely inspecting your hose, but when you have a leak somewhere within just your irrigation plumbing program, it may well consider you a little extended to obtain and deal with the problem. 

The first phase in figuring out if you have an irrigation leak is to glimpse at your h2o meter, specially the minimal stream indicator to see if it is moving when it is not making use of drinking water. If it is, you unquestionably have an irrigation leak. 

Next, turn off your primary sprinkler valve, then search at your low stream indicator on your meter all over again. If it keeps moving, your leak is probably inside of your house. And if the indicator stopped moving, the leak is coming from your most important sprinkler system pipe.

To do a visual inspection, switch the sprinkler process valve on once again, then wait around a couple of minutes for the key pipe to refill with water. Convert on one zone working with your controller, then go to that zone. You will possibly hear water functioning or see it effervescent from the floor and pooling water. 

Examine the sprinkler head far too so you can come across out if you require to switch or fix the sprinkler head. This is a very simple system that most property owners can comprehensive on their individual. Repeat this inspection process till you discover which zone is becoming impacted by your irrigation leak. 

After you locate the leak and validate that it is not just a misaligned sprinkler head, switch off the valve and call a qualified plumber who can assistance. They can make sure you resolve your leak properly. If you try out to do this yourself, you operate the chance of not addressing the root result in of the leak. 

4. Lateral Line Leaks 

Another common issue that is driving up your utility bill could be your sewer line. Inside of your sewage process on your assets, the lateral line is the pipe that carries the squander from your home to the community sewer most important line, which is generally situated in the avenue in your community.

When a sewage line leak goes undetected, this can guide to important problems to your assets. In excess of the class of time, that leak can cause sinkholes around your dwelling, on sidewalks, or even in the road. 

There are loads of strategies to detect a lateral line leak. Initially of all, you can simply just discover the odor of squander. A broken lateral line implies sewage is becoming distributed underground somewhere. That odor will be detectable if the leak is substantial. 

You can also find swimming pools of sewer water on your house, which will existing a negative odor. If you are going through drain clogs on a steady foundation, that also indicates a damaged sewer pipe. 

In purchase to figure out the correct site of in which you have to have sewer line maintenance, you should really seek the services of a plumbing business that delivers residential plumbing leak detection. They can use a digicam to navigate the sewer line to locate the leak, then fix the leak appropriately. 

5. Overwatering

Last but not least, a person of the most popular difficulties is overwatering your assets, which can be attributed to your sprinkler system. Overwatering can lead to weeds, bugs, and ailments that will harm the health of your lawn. 

The most frequent signals of overwatering your lawn include:

  • You see h2o functioning off your lawn down the avenue.
  • You see far too considerably thatch, which is a layer of partly decomposed plant substance.
  • You notice additional bugs hiding in your lawn.
  • You really feel a sponginess on the surface of your yard.  
  • Your garden demonstrates signals of discoloration, which is most likely fungi. 
  • You place an too much amount of weeds, like crabgrass.

Dependent on your sprinkler program, you need to have to search at a number of factors that may perhaps cause overwatering. For case in point, your runtimes may perhaps be far too very long, or you could not have the rain sensor turned on.

Get started to alter the volume of time you run your sprinkler program, then gauge it around the class of a number of weeks. It is ideal to minimize the quantity upfront, then modify as you see match. 

Far more Strategies to Preserve Dollars on Irrigation 

The faster you discover the aforementioned irrigation challenges, the additional you can preserve. And you can be even far more proactive and make updates to your recent irrigation plumbing method. 

Make investments in Pipe Bursting 

This is a newer plumbing approach that incorporates devices that split your existing pipes. It pulls a pipe bursting head by the current pipe to split it, though pulling the new pipe inside. 

Pipe bursting replaces your current pipelines devoid of truly getting rid of the aged types. This method is way less damaging to your garden, and it can be utilised to even upsize your pipelines, which boosts the amount of move capacity in your irrigation program.

Spend in Trenchless Pipe Lining

You can undertake this trenchless tactic to update your existing techniques in a way that doesn’t harm your yard. The trenchless pipe lining approach is quickly, so you don’t have to stress about downtime. 

As well as, the new pipe lining is sleek and arrives with an extended lifespan. Depending on the plumbing company you use, the resin that is applied as a new pipe liner can arrive with a assure of at minimum 50 a long time. 

As you can see, some irrigation plumbing challenges can be resolved speedily and on your personal. But other people are significantly far more challenging and included, which calls for plumbing specialists. You can also make investments in updating your recent irrigation programs using pipe bursting and trenchless pipe lining, saving you big on preventative routine maintenance more than the lengthy time period.

Trenchless Pipe Lining: The Ultimate Sewer Repair Solution





Supply hyperlink

Continue Reading

3 + 1 things to know about flooring

montclair roofing

Here there are 3 + 1 things to know about flooring. Montclair Roofing and their trustworthy workers and undertake for many years carpentry, montclair painting, contracting, house restoration and renovation services in Montclair and other New Jersey towns. Between the cost of materials, the time spent on installation and the ongoing need for maintenance, it is easy to understand why many homeowners are longing to be sure they are making the right choice. Choosing flooring for your home is a big decision.

If you find yourself in a similar situation, you are in the right place. Below you will find some tips on how to choose the right flooring for any room in the house. Carefully read our advices and them to make the perfect purchase.

1. Consider the functionality in Montclair Roofing

First of all, you need to think about where the floor you choose will be used. For example, some materials may be suitable for high traffic areas, while others will not be able to withstand the same level of wear. On the other hand, some types are optimal for providing comfort in a remodelling, while others may seem to be lacking in comparison.

Below is an overview of the best uses for the most common types of flooring:

Vinyl: It is made of synthetic polymers and added pigment for the paint. It is easy to clean and extremely water resistant. It is the ideal choice for spaces such as kitchens and bathrooms.

Tile: As the tile is made of ceramic or porcelain, it is also very water resistant and easy to clean. Used in areas such as kitchens and bathrooms that need to withstand frequent cleaning.

Composite wood: This treated version of wood flooring is made by compressing several layers of plywood and placing a thin layer of hardwood over the top. It can be installed on any type of substrate and is suitable for any room without moisture.

Carpet: Usually made of polyester, nylon or polypropylene. Carpet fibers make it a natural choice where comfort is the key. It is best used in bedrooms and living areas.

2. Keep maintenance in mind

Since most rooms in the house could be served just as well by more than one flooring material, you should also consider how much maintenance you want to provide. Be honest with yourself. Over time, proper maintenance is what ensures that you make the most of your investment.

Consider the following as you make your decision:

Vinyl: Dirt and surface leaks are easily cleaned on vinyl. All you need is a broom, a mop and a light bar of soap. However, vinyl is difficult to repair when damaged, so do your best to keep it safe.

Tiles: The tile itself is easy to clean with some soapy water, but mortar is another story. Stucco can easily attract dirt, stains and even mold. You should be ready to replace it every 5-10 years, depending on the quality of maintenance.

Composite wood: Usually, all you need to do to care for a treated wood is to wipe and clean the surface with a damp mop. As this wood tends to be easy, you should clean the leaks as soon as possible and avoid sharp objects (eg high heels).

Carpet: Carpet fibers are easily soiled, so they must be cleaned immediately with a cleaner approved by the manufacturer. Apart from this, the regular vacuum cleaner should also become part of your schedule.

3. Do not forget your budget in montclair roofing

You need to consider the cost of your flooring material. Choose one that fits your budget comfortably. While each product is different, here are some standard price ranges:

Vinyl: Vinyl is the most affordable option. It usually ranges from 2-4 euros per square foot and can be purchased in large sheets. It can also be installed on any type of substrate, which reduces installation costs.

Tiles: Tile designs are more expensive. They can range from 12-19 euros per square foot, depending on the material and design that you use. In addition, it is best to let a professional handle the installation. Which means you have to add labor costs.

Composite wood: A more affordable alternative is hardwood, as prices tend to range from 7-11 euros per square foot.

Carpet: At 4-6 euros per square foot, carpet is a fairly affordable option, although it usually requires professional installation.

+1. More details about wooden floors

The fashion of decoration has restored the wooden floors, as it is a natural and living material that exudes a sense of warmth in the space. Today the investment options are very many and meet all the requirements. Rustic, modern, solid or imitation are all there, as long as you use them properly.

Full-length boards: They are solid wooden boards that exist in various dimensions, from all types of wood (oak, beech, iroko, etc.), in different qualities and shades. Nails or gluers are placed. It is the most timeless and beautiful choice.

Pre-polished: They are the composite boards (semi-solid) that are lined with a sheet of real wood. They come polished and ready for installation. They are placed nailed, glued or even floating. It may be the most economical option, but it has a shorter lifespan

Laminate: They are the synthetic floors that mimic the appearance of wood. They consist of different layers of materials and as a final coating have a photo of wood. Mainly, they are suitable for business premises.  Can be really economical, but they wear out very easily.

General decoration tips for wooden floors

A dark floor with light walls makes the room more spacious in Montclair roofing. A dark floor with a dark ceiling shows the room lower and darker. The combination of light-colored floor with light-colored walls creates the feeling of space. Dark walls generally in a space with a light floor and ceiling emphasize the horizontal lines.

External use

In this case you place special woods, resistant to moisture, which you tie to a frame to drain the water. There are many dimensions, colors and designs to choose from. They are relatively easy to assemble. In some cases you can assemble the pieces yourself. But, it’s best to trust Montclair Roofing for a professional flooring installation in order to have a satisfying result.

Read more:

Continue Reading

 Where to stay when in Santorini island

:where-to-stay-wh…santorini-island: 1

Where to stay when in Santorini island

Santorini Santorini car rental is the most well-known island of Greece worldwide, with its images of people traveling around the world and being the number one travel desire for many people! Colorful rocks erupt from the caldera down in the sea, white houses and alleys with blue windows and details and of course, beautiful sunsets.

With the fame of the volcanic beaches, and the romantic aura, it is no surprise that Santorini is a very popular destination and attracts around 1.5 million tourists every summer!

History of Santorini

Santorini or Thira, is located in the middle of the distance between Athens and Crete. The island looks like a semi circle  as far its shape is concerned. The neighboring islands suggest that Santorini was once circular, before the volcano erupted back in the  ancient times. Thousands of years ago, a huge volcanic eruption caused the center of then-Santorini (which was circular) to sink, leaving a caldera (or volcano crater) along with high towering cliffs along the east side of the island – the most commercial part of the island of today.

The other side of the island

The east coast of Santorini is less known than the famous west coast. The eastern seaside resorts such as Kamari and Perissa have a more traditional and island way of life, while here you will meet many locals. In these 2 villages live many people who work on the island as there the prices on the houses and the rent  are significantly cheaper than the center of the island.

The coast of Santorini at that point is covered with black, volcanic sand and black rocks while in the southern part there is the famous red beach of the island – a favorite destination for both swimming and photography. Many people around the world are visiting Santorini only to witness the beauty of the black sand and the red beach!

Do not also forget to visit Pyrgos – a traditional village with wonderful food and picturesque alleys to walk through!

Accommodation in Santorini island

Accommodation in Santorini is quite expensive – especially in touristic spots, such as the center of the island, Oia and Fira. Fira, Firostefani, Imerovigli and Oia, have hotels and villas with private pools, Caldera views, whitewashed interiors, luxury caves and jakuzzis with endless views for amazing photos and a relaxing experience.

Unfortunately, in these accommodations you have to spend a small fortune as the prices during the summer  usually start from 250-300 € per night and are very popular with increased demand. This means that you need to book your accommodation very early in order to get a good deal for more than 4 nights.

:where-to-stay-wh…santorini-island: ‎

The brand new hotels located in Fira or even farther than the center offer much more affordable prices and offer quality, luxury hospitality in suites and caves with jacuzzi, just 5 ‘walk from the square of Fira, from just 155 €! You will need to research about the prices and the availability of the hotels and if you are lucky and find one of the rooms or suites available.

If you want a more budget-friendlly solution in the places mentioned above, then there are decent accommodation facilities away from the crowded center which also include privileged facilities such as private pool! Just make sure to book rental rooms or smaller hotels!

When to visit Santorini

The island of Santorini is one of the few places in Greece that has tourists almost all year round, especially in spring and summer. The greatest demand is from April to the end of October, but in recent years efforts have been made to make Santorini a tourist destination 12 months a year! This is because there are many hotels which work 12 months per year and of course there are a lot of people who live there.

If you want to visit Santorini and take advantage of the low prices in hotels, then the best season is either Spring or Autumn after August! The weather will be warm enough for you to enjoy the beach in the morning and

Rent a car in Santorini

When you are going to get to Santorini, you will find out that it is quite difficult to move around if you do not have a car or another vehicle. The bus routes are very few and congested. So what we would suggest, is to rent a car in Santorini so that you can move around at ease.

Choose between the many different models of santorinieasyrent.com and enjoy your vacation on the island! You are going to see so many places and of course you will save some money by staying further away from Oia and Fira where hotels are very expensive!

Fly to Santorini

In order to get to Santorini you can get a ship from Peiraias or fly there. The easiest way if you are travelling from abroad is to book a flight. Santorini airport is not very large but it will help you get back home quicker and with less delay.

You could also rent a car in Santorini airport car rental so that it would be easier for you and your family to move around. Enjoy your vacation in Santorini!

See more about Santorini Rent a car:

Continue Reading

How to maintain your solar water heater

how-to-maintain-your-solar-water-heater

The solar water heater is not immortal… Installing a solar water heater is a wise choice for a household, because it provides hot water at a very low cost, most of the day and for many years.

Most of us, however, forget that the solar water heater is an electrical – hydraulic device that manages a large amount of water that contains salts and “up there at high altitudes” is exposed to the weather. So remember that we need to maintain the solar water heater before our solar system no longer heats water as before or not at all.

How often should I check and maintain my solar water heater?

From a technical plumber,– Αποφράξεις Αντωνίου, it must be done at most every 2 years and ideally every 1 year. However, every owner of a solar water heater, even if he does not notice any problem in the operation of his solar water heater, it is good to examine him twice a year. Below we explain in detail why and how.

Is it necessary to maintain a solar water heater?

Yes! After each new solar water heater installation, there is a maintenance process recommended by the manufacturers and there is a new solar water heater installed in the booklet.

Maintenance of the solar water heater is not only necessary to ensure the continuous production of hot water, our safety and the long life of the water heater. Maintenance is necessary to ensure the manufacturer ‘s warranty (5 or 10 years, depending on the case).

Thus, most manufacturers recommend every 1 or 2 years (depending on the manufacturer), to be checked by a licensed technician and to replace the magnesium anode as well as to supplement if the antifreeze-anti-corrosion fluid of the closed circuit of the collector is needed. Only then does the warranty given to us by the manufacturer apply. 

Magnesium anode protects the water tank (boiler) from corrosion. Due to electrolysis and the antifreeze from freezing water and the accumulation of salts in the solar collector circuit.

how-to-maintain-your-solar-water-heater

When is the best time to maintain a solar water heater?

Regular maintenance of the solar water heater is best done in September-October, ie before winter comes. This is because reduced sunshine and low winter temperatures reduce the efficiency of the solar water heater and in fact, less hot water is produced with the help of the sun. 

If we are sure that everything is working properly, the uninterrupted and safe operation of the water heater is initially ensured in order to avoid a fault that will suddenly leave us without hot water.

Also, if the solar water heater operates at maximum efficiency, we save money because we will not need to turn on the electricity often to heat the water.

What other work can be done when maintaining a solar water heater every 2 years?

The technician who checks our solar water heater every 2 years, must also check the other parts of the solar water heater to judge if some small or even bigger repairs are needed.

During the regular maintenance of the solar water heater, the technician will do the following:

  1. checks pipes, fittings, flanges for any water leakage, or whether they are loose or worn. Any damage is repaired.
  2. controls the boiler and resistance for the accumulation of salts and mud or corrosion. The inside of the boiler is revealed anyway when the magnesium anode is replaced. If the accumulation of salts and mud is intense, the boiler and the resistor are cleaned. It is recommended to clean the boiler every 5 years so that you always have the maximum efficiency.
  3. checks the safety valve (pressure relief) if it has a salt buildup and if it is working properly. If it does not work properly it must be replaced.
  4. controls the insulation in the water pipes. If damaged, they are replaced to protect the entire system from very low temperatures.
  5. checks the electrical circuit to see if the thermostat and fuse are working. If there are loose or damaged joints and to repair them.

Can I, as the owner, do something to ensure the proper operation of my solar water heater?

Yes of course! To ensure the longevity, continuous efficiency and safety of the solar hot water system, each owner must inspect and maintain the solar water heater twice a year. Preferably in April and October. 

The controls and maintenance that the solar water heater must do on the owners themselves include:

  • the maintenance of the solar panel
  • check for any water leaks
  • protection from very high temperatures
  • protection from very low temperatures

Maintenance of the solar collector

First, we need to look at the crystal of the solar collector. It must have no cracks at all, be clean of leaves, dust, etc. and not in the shade.

If the crystal is broken even a little, it must be replaced immediately because the entire solar panel system can be damaged. In this case, we cover the crystal with plastic and call the technician to replace it.

If there are trees that have grown and cast their shadow on the solar panel, then make sure they are pruned so that the collector receives the maximum amount of solar radiation it can receive.

If there is dust or leaves on the crystal of the solar panel that has not been washed away by the rain, then wash the crystal with lukewarm water and dishwashing liquid and remove them. Be careful, not in time with intense sunshine, so that intense contractions do not occur- expansions.

how-to-maintain-your-solar-water-heater

 Check for water leakage

We check the piping, connectors and flanges of the solar water heater. Is there a water leak or are the connectors and screws loose or worn?

We check the safety valve on the boiler. Has a lot of salt accumulated around her? This may have affected its operation and may not be activated.

Water leakage from the safety valve is normal. If it is not done continuously and if the amount of water leaving is small. If we know how to do it, we can see if the safety valve is activated by pressing the lever with a tool.

Finally, we have in mind any water leakage, even small, in all plumbing that brings hot water to our home, as well as in taps.

In any case, the damage must be repaired to prevent further damage to the solar water heater or a sudden failure that will leave us with no hot water at all.

Protection against high temperatures

In the summer months, if we see that the temperature of the hot water is too high or if we do not use a large amount of hot water, then we cover part of the solar panel with an opaque cover (eg cardboard), starting from the bottom of the collector…

During the summer we are on vacation, we cover the entire surface of the solar panel with an opaque cover. So that the collector is not strained for no reason by the high temperatures.

Protection from low temperatures

We make sure –Αποφράξεις Αντωνίου Αθήνα that the level of antifreeze in the collector circuit is regularly checked and supplemented.

We check that the insulation in the water pipes is always in good condition.

In cold weather, if the water in the water pipes is frozen, we do not turn on the solar water heater.

So if we regularly check and maintain the solar water heater, it will provide us with uninterrupted hot water for many years. And we will have earned the maximum depreciation for the investment we made!

Read more about professional plumbing tips:

 

Continue Reading