Common Plumbing Mistakes To Avoid

Common Plumbing Mistakes To Avoid

Plumbing is one of the important procedures that need to be carried out during construction. It is a task that requires a lot of skill and concentration. It is one of those jobs where the professionals cannot afford to do even a small mistake.

Whether it is a house or any building for that matter leaking pipes or stagnating water is the last thing that anyone wants to have. In this article, we will see the common plumbing mistakes that need to be avoided.

Common Plumbing Mistakes To Avoid

Vents and Traps

One of the common things that are being overlooked is having a proper vent in the basement. At times it is easy to combine vents, but before doing it make sure that the state building code allows it. Also, understand that every trap requires a vent.

If there is no vent for a trap, then there are good possibilities that the water can be siphoned which leaves the trap useless and dry. If you are using a trap for the sink opt for the P-trap which is the perfect choice for the sink.

Inadequate slope

We all know that too much of slope is never good. If the slope is too much, we have to keep hitting the floor on a daily basis. At the same time if enough slopes are not provided, then the water flow to the drain will not be perfect.

Some amount of water will be stagnated, and we might have to push the water manually for it to reach the drain. Hence it is mandatory to provide enough slopes so that the water and some solids dissolved in it reach the drain without any hindrance.

Inadequate Clean Outs

When it comes to cleanouts, there are a lot of things that might go wrong. The two common mistakes are the inadequate number of cleanouts and the wrong location of the cleanouts. As per building code cleanouts are not necessary above the first floor.

But depending on the design of the lines it would be better if you can add some cleanouts. At the base of the sanitary stack, a cleanout is mandatory. If the change of direction in the line is exceeding forty-five degrees, then a cleanout is a must.

Space around toilets

Just because you need the hall and the room spaces to be more, it does not mean that you can reduce the space of the toilet. There should be a minimum space of fifteen inches in the side and eighteen inches in the front.

This is because if there is any major issue in the toilet that needs to be treated, space around will make the work easier for the individual.

  Pressure relief valves

As the name states, the pressure relief valves are required to relieve the pressure that is built up in the pipes. These drain piles are closed structures with a constant flow of liquid.

There are good possibilities that pressure might build up in certain areas which are not good for the draining process. Hence enough pressure relief valves must be fitted for the flawless working.

Continue Reading

Interesting Fact About Plumbing

Interesting Fact About Plumbing

We all know that plumbing is a job that involves a professional who deals with pipes, taps and other equipment. The reason why so much importance is given to plumbing is that it is one profession where a simple mistake can cause huge problems.

It might be a minute water leakage from the trap of liters of water coming out of the drain; plumbing issues is the kind of problem that we do not want to face. For people who know to plumb as just a profession, here are some of the things that you need to know about plumbing.

Interesting Fact About Plumbing

The Pyramids

Many might think what pyramids have to do with plumbing. Well, actually sources have said that there are plumbing works that can be found in pyramids.

The Pharaoh Sahure who was the ruler of Egypt from 2517 to 2505 BC had a copper plumbing system that was used to drain the water in the temples after cleaning it.

Babylonian Factor

If you are thinking that the modern plumbing method is a very recent invention, you are terribly wrong.  It was the Babylonians who invented these methods almost four thousand years ago.

Whatever plumbing methods that we are following now are just a mere improvement or the upgraded version of the method that was invented by the Babylonians. Their practice was way ahead of its times that included properly constructed public toilets, drainage collections and a lot of other aspects.

The lengths we have gone

There was a time when copper pipes were very much confined with royal people. But later it became very common because the demand became too high. From the earlier 1900s to date the length of the pipes that we have used for plumbing is so much that it can be circled the entire earth two hundred times.

Plunger types

Interesting Fact About Plumbing

There are good possibilities that you might have thought that there is only one plunger. But the truth is that there are two types of plungers. They are flat bottomed plunger which is used for the showers and narrow bottomed plungers that is used in the toilets.

Gallons and counting

When a tap is dripping the first thing that hits our mind is the annoying feeling that it creates. But there is a bigger problem that never comes to our mind.

In just eight minutes a dripping tap can fill a full glass. If we do the math, that accounts for 2160 gallons every year. If water from one tap can make so much just imagine the amount of water wasted from taps all over the world.

Albert Einstein and plumbing

You might think what this world-famous physicist has to do with plumbing. Well, do not put too much thought into it. He was made as an honorary member of the plumbers and steamfitters union after he stated that he would love to be a plumber.

Continue Reading