We have all found ourselves in the awkward position of finding out that the sewer – Αποφράξεις Πειραιάς – is clogged. The water starts to come out, forming a pond, while at the same time there is a bad smell. Nightmare! Fortunately, there is a solution for quick and easy treatment! Soda is your ally! Read how to make a sewer blockage with soda and it will look like a toy!
In order to be able to unclog the sewer, you must first understand what made it clogged. Every day, various papers, soaps, bristles, food scraps leave the sinks, showers and washing machines to end up in the sewer. The result is that the sewer is clogged and the water has no way out. It is a very common problem, which is often due to poor construction of the sewer, something that you can diagnose with obstructions with a camera. But next time, you will be ready to face it!
3 easy ways to unclog drains with soda
1. Use soda and vinegar
Initially, it would be good to put on gloves and try to remove unnecessary hairs and all other debris from the siphon. This way your sewer will be cleaned even more easily. Then pour half a cup of baking soda into the drain hole, sinks and bathtub. Then heat some vinegar in the microwave and gradually pour it over the soda. This step must be done with special care as the combination of vinegar with soda will start foaming and will cause fumes from the plumbing. Leave the mixture to act for half an hour and immediately turn on the tap to run plenty of water. In the bathtub it will be better to put the cap to close the outlet and then fill it with water. When you pull the plug, the water pressure will be blocked
2. Treat clogged drain with soda and salt
If the drain is clogged with various fats or greases, then the blockage of the drain should be done with soda and salt. Mix half a cup of salt with half a cup of soda and pour the mixture into the sinks. Let it act for about 20 minutes and then pour a cup of boiling water into each tube. Let it act overnight and in the morning pour plenty of water to rinse off any residue left from the mixture. Your sinks will be spotless and ready to use!
3. Prefer soda and hot water for an easy and quick preventive cleaning
Another way to block drainage is with soda and hot water. After collecting as much hair as you can using the gloves, put water in a kettle and let it boil. First pour half a cup of baking soda into the drains and then the hot water. Allow the solution to act for a few minutes and then add plenty of hot water. In case the pipes are not very clogged, instead of blocking the drain with soda and water, you can put the hot water alone in two doses. This is the easiest and fastest way, but it works best in slightly clogged drains or for precautionary reasons.
Extra tips for effective unclogging with soda
1. Avoid trading products
Unlike soda blockage, commercial products usually destroy the piping and often do not deliver on their promise. In addition, due to the very strong chemicals they contain, not only do they contribute to the pollution of the environment but if mixed with soda, the fumes will be very harmful to humans.
2. If the plug persists, use baking soda
If the drains are very clogged, instead of baking soda you can use washing soda which is a stronger cleanser. A prerequisite, however, is that you have not previously thrown a preparation of the trade.
3. Do not neglect to clean the sewer
In contrast to the blockage, with the cleaning of the sewer, all the pipes and the wells are dismantled and cleaned and not only the well that was last clogged. This way you are sure that the sewer will not be clogged soon, nor will dirty water come out which will contaminate the area. Experts recommend cleaning the sewer at least twice a year. One in spring and one in autumn, before disinfection.
If the soda blockage does not work, the plug is deeper in the pipes and you will need the help of an experienced plumber.
Lately you notice that the cesspool is filling at a faster rate compared to the past. What is the cause of the problem and what is the appropriate solution?