4 common kitchen sinks problems and how to solve them

4 common kitchen sinks problems and how to solve them

When it comes to plumbing in a kitchen sink, most of us feel desperate and will usually seek the help of an experienced plumber from Αποφράξεις Αναγνώστου. But even if the plumber is sometimes the only solution, there are some problems in the kitchen sink plumbing that you can solve yourself in the first phase.

See what are the most common problems in the kitchen sink plumbing to know what to do before you finally decide to call a plumber.

Low water pressure

A reduced water flow means that the water supply system has a low water supply pressure. Usually, however, the main cause is that the metal filter has accumulated salts in the faucet.

It often happens that the salts contained in the water, such as calcium, settle and in time block the outflow of water from the filter to the tap. This prevents water from running freely. In fact, if in the area where your property is located, the water supply network has water with a high content of salts, then there is a risk that you often have such problems in the kitchen sink faucet.

You can clean the salts that collect at the tap nozzle by unscrewing the metal filter on the edge of the battery and soaking it in white vinegar for a few hours. Clean it carefully with an old toothbrush to remove salts from the filter mesh. And you will see that its metal will soon shine again.

Screw it back into the sink faucet. The water after that should run comfortably from your tap. You can often repeat this easy cleaning of the filter at the faucet to facilitate the flow of water, in case the problem is due to salts.

There is of course the case that the whole issue is due to the low pressure of the water supply network in your area. In this case you should call the plumber to do the necessary technical work to adjust the water pressure to normal levels.

Leak in the kitchen sink faucet

It is true that when the faucet in the kitchen sink drips, then you need to call a plumber. However before calling the plumber, take the trouble to check if this water leak is due to a simple plumbing problem. First find out where the leak is coming from.

For example, if it starts near the base of the battery then the faucet hose may be worn. Such plumbing minor problems occur frequently and to a large extent, especially when the sink is old or worn. If you have a mastery of craftsmanship you could do it yourself.

You should also pay special attention to traces of moisture and leaks as they can cause more damage, such as damaging kitchen cabinets.Caution! Whenever you check the plumbing supply in the kitchen sink for various malfunctions or damages, remember to turn off the water supply first.

Clogged sink in the kitchen

This is another common problem in the plumbing of a home. It happens in many households that the drain of the sink in the kitchen becomes clogged and blocked. This way the water in the sink is not removed. The sink drain may be clogged with grease, detergent, food scraps and soap. All of these together accumulate on the walls of the drain pipe in the kitchen sink and cause clogging.

Most homeowners do not use enough water to flush out food scraps that fall from the kitchen sink into the drain. The result is that they collect in the branches of the sewer pipe under the sink and prevent the proper drainage of water. We have to be very careful about what we throw in the sewer to avoid leaks and clogging.

Although in such cases you should seek help from a professional plumber , sometimes you can solve this problem on your own. Before calling the plumber try to use a clogging suction cup to remove the water that has stagnated in the sink.

If even after using the suction cup the water stagnates or the drainage is done slowly, then you can use a special cleaning solution, suitable for kitchen sinks, which you will find on the market. These cleaners can work effectively to remove grease and debris that has accumulated in the sink drain pipe.

If you see that the cleaners do not work, do not insist, because there is a possibility of causing more damage to the piping. Here we must say that the action of chemical cleaners releases heat, which if it is outside the limits of strength of pipes, can destroy them.

Beware of chemical cleaners : Commercial cleaners can help the situation, but because they are chemical their use requires special care. Follow the instructions for use on the product.

If the kitchen sink is completely clogged and the water has stagnated, do not use chemical cleaners. Avoid using cleaners especially if you have a kitchen sink full of water that does not leak. There is a risk of injury.

Call the plumber immediately , for professional blockage and cleaning of the drain pipes of your sink.

Water leakage in the sink pipes

We usually understand that the sink pipes are leaking when the floor of the cupboard under the sink has been watered with water. The leak may be due to either a fault in the water supply pipe or a fault in the drain pipe (pipette). If the damage is due to the water supply pipe, then we see permanent drops of water or just moisture on the pipe, in places where there is a crack or in its joints.

If the fault is due to the drain pipe, then leakage only occurs if water is running into the sink. The most common causes of this damage are:

  • the siphon is clogged with rubbish, so the water due to the pressure created comes out of the joints if they are not tightened well. In this case we follow the steps described above.
  • the joints of the joints are loose, so if you have the right tools and are a little skilled, you can fix it yourself.
  • there is a crack in the plastic siphon of the sink, due to a defective construction or due to the passage of high temperature water, which does not meet its construction specifications.
  • there should be corrosion and crack in the metal siphon of the sink.

Replacing the entire pipette is the only solution if:

  1. you have pipettes with cracks
  2. pipettes that leak even after cleaning
  3. rusted metal pipettes
    pipettes with connectors that no matter how tight you tighten them, do not seal.

For any problem with your kitchen sink, contact Αποφράξεις Αναγνώστου for immediate service and economical and reliable repair.

See more areas Αποφράξεις Αναγνώστου serve:

Continue Reading

3 + 1 things to know about flooring

montclair roofing

Here there are 3 + 1 things to know about flooring. Montclair Roofing and their trustworthy workers and undertake for many years carpentry, montclair painting, contracting, house restoration and renovation services in Montclair and other New Jersey towns. Between the cost of materials, the time spent on installation and the ongoing need for maintenance, it is easy to understand why many homeowners are longing to be sure they are making the right choice. Choosing flooring for your home is a big decision.

If you find yourself in a similar situation, you are in the right place. Below you will find some tips on how to choose the right flooring for any room in the house. Carefully read our advices and them to make the perfect purchase.

1. Consider the functionality in Montclair Roofing

First of all, you need to think about where the floor you choose will be used. For example, some materials may be suitable for high traffic areas, while others will not be able to withstand the same level of wear. On the other hand, some types are optimal for providing comfort in a remodelling, while others may seem to be lacking in comparison.

Below is an overview of the best uses for the most common types of flooring:

Vinyl: It is made of synthetic polymers and added pigment for the paint. It is easy to clean and extremely water resistant. It is the ideal choice for spaces such as kitchens and bathrooms.

Tile: As the tile is made of ceramic or porcelain, it is also very water resistant and easy to clean. Used in areas such as kitchens and bathrooms that need to withstand frequent cleaning.

Composite wood: This treated version of wood flooring is made by compressing several layers of plywood and placing a thin layer of hardwood over the top. It can be installed on any type of substrate and is suitable for any room without moisture.

Carpet: Usually made of polyester, nylon or polypropylene. Carpet fibers make it a natural choice where comfort is the key. It is best used in bedrooms and living areas.

2. Keep maintenance in mind

Since most rooms in the house could be served just as well by more than one flooring material, you should also consider how much maintenance you want to provide. Be honest with yourself. Over time, proper maintenance is what ensures that you make the most of your investment.

Consider the following as you make your decision:

Vinyl: Dirt and surface leaks are easily cleaned on vinyl. All you need is a broom, a mop and a light bar of soap. However, vinyl is difficult to repair when damaged, so do your best to keep it safe.

Tiles: The tile itself is easy to clean with some soapy water, but mortar is another story. Stucco can easily attract dirt, stains and even mold. You should be ready to replace it every 5-10 years, depending on the quality of maintenance.

Composite wood: Usually, all you need to do to care for a treated wood is to wipe and clean the surface with a damp mop. As this wood tends to be easy, you should clean the leaks as soon as possible and avoid sharp objects (eg high heels).

Carpet: Carpet fibers are easily soiled, so they must be cleaned immediately with a cleaner approved by the manufacturer. Apart from this, the regular vacuum cleaner should also become part of your schedule.

3. Do not forget your budget in montclair roofing

You need to consider the cost of your flooring material. Choose one that fits your budget comfortably. While each product is different, here are some standard price ranges:

Vinyl: Vinyl is the most affordable option. It usually ranges from 2-4 euros per square foot and can be purchased in large sheets. It can also be installed on any type of substrate, which reduces installation costs.

Tiles: Tile designs are more expensive. They can range from 12-19 euros per square foot, depending on the material and design that you use. In addition, it is best to let a professional handle the installation. Which means you have to add labor costs.

Composite wood: A more affordable alternative is hardwood, as prices tend to range from 7-11 euros per square foot.

Carpet: At 4-6 euros per square foot, carpet is a fairly affordable option, although it usually requires professional installation.

+1. More details about wooden floors

The fashion of decoration has restored the wooden floors, as it is a natural and living material that exudes a sense of warmth in the space. Today the investment options are very many and meet all the requirements. Rustic, modern, solid or imitation are all there, as long as you use them properly.

Full-length boards: They are solid wooden boards that exist in various dimensions, from all types of wood (oak, beech, iroko, etc.), in different qualities and shades. Nails or gluers are placed. It is the most timeless and beautiful choice.

Pre-polished: They are the composite boards (semi-solid) that are lined with a sheet of real wood. They come polished and ready for installation. They are placed nailed, glued or even floating. It may be the most economical option, but it has a shorter lifespan

Laminate: They are the synthetic floors that mimic the appearance of wood. They consist of different layers of materials and as a final coating have a photo of wood. Mainly, they are suitable for business premises.  Can be really economical, but they wear out very easily.

General decoration tips for wooden floors

A dark floor with light walls makes the room more spacious in Montclair roofing. A dark floor with a dark ceiling shows the room lower and darker. The combination of light-colored floor with light-colored walls creates the feeling of space. Dark walls generally in a space with a light floor and ceiling emphasize the horizontal lines.

External use

In this case you place special woods, resistant to moisture, which you tie to a frame to drain the water. There are many dimensions, colors and designs to choose from. They are relatively easy to assemble. In some cases you can assemble the pieces yourself. But, it’s best to trust Montclair Roofing for a professional flooring installation in order to have a satisfying result.

Read more:

Continue Reading

How and why to check a fire door

how-and-why-to-check-a-fire-door

A day-to-day part of life any door is typically ignored, but you never understand when a fire door ( portes pyrasfaleias ). will enter action meaning they need to be properly preserved. There are a number of reasons a fire door might come to be much less efficient than it must be which we may not realize are concerns to begin with or even think to examine. The Fire Door Inspection Scheme are the security standards body who look after these facets, as well as recent findings reveal that there are occasionally issues that compromise that safety and security

Why do we need fire doors?

Fire doors are larger than regular interior doors, have a seal around the edges which increases when heated up, have fireproof glazing if any type of home windows exist as well as fire resistant ironmongery and also are fitted with door closers enabling them to shut instantly.

They are designed to prevent and slow down the spread of fire as well as smoke across the structure. Also separate fire to a particular area, giving people much longer time to leave the place. Even the fire solution time to save any person that may be trapped. Simply they are made to save lives.

Below are a few things to take into consideration when inspecting your fire doors:

  • Fire doors should be effectively checked and also certificated
  • There should only be very tiny spaces
  • Fire doors need to be fitted with in tumescent seals
  • Fire doors should be fitted with complete hinges
  • The door should shut appropriately

Fire doors ought to be correctly evaluated and certificated

Every fire door need to have been effectively evaluated and certificated as suitable for objective before installation. Check each door for proof of the qualification. There should be a noticeable label, or plug, generally on top of the door however, periodically, on the side.

An excellent tip for examining this is to use a mirror, or a ‘selfie‘ setting on your cellphone video camera facility to inspect these possibly ‘uncomfortable to access’ positioning. If you can not discover the certification label, after that report the door to the structure manager.

There need to just be very tiny voids

The maximum void that should exist around the top and also sides of the door is 4mm. The void under the door can be a little more (approximately 8mm), but should certainly be no bigger. As a basic regulation, if you can see light from under the door then the probability is that this space is as well huge and also, potentially, fire as well as smoke can breach this space. If this is the case, the door needs to be reported.

Fire doors should be fitted with in tumescent seals

In tumescent seals are vital to the fire door’s performance as they increase with heat, therefore making certain that fire and also smoke are consisted of with the fire resource and also does not spread right into the adjacent location. These seals ought to be inspected routinely for damage of any kind that might endanger this feature.
Fire doors need to be fitted with total hinges

All fire doors must be fastened with a minimum of 3 joint sets and also need to have no damaged, or missing screws. If you see any kind of proof of this, after that report the door. These faults can seriously compromise the security and also function of the door in the event of a fire break-out.

Does the door close correctly?

Inspect the door’s closing feature by unlocking to concerning midway, after that launch it as well as let the door close by itself. Guarantee that it closes strongly on the lock without sticking on the flooring or to the structure. If this doesn’t occur, after that report the door.

Bear in mind, a fire door is just of use if it is in ideal functioning problem. Examine all your fire doors on a regular basis and also NEVER have them wedged open for any function! If you assume there is a fire door in your structure that is compromised whatsoever, after that report it immediately to the pertinent individual in authority.

See more about fire doors:

Continue Reading